Accidents from usage, managing and keeping fuel products can result in severe effects. This can be reduced by ensuring that safety procedures are followed and ensuring proper storage mechanisms.
Tractors have immensely contributed to farm productivity. This has enabled farmers to feed themselves, their community and the world at large. As much as the tractors manufactured in this era are safe, they can still get involved in accidents.
As time goes by, manufacturers have been able to add improved safety features like seat belts and travelling lights. All these cannot, however, replace the skills of well-trained operators who are aware of and can avoid farm accidents.
Fueling can pose serious issues because it involves flammable products like petrol. Petrol releases combustible vapor that expands into the atmosphere.
There are a number of potential safety issues that can arise during the fueling process. They include fire, spills, and falls. Spills are the major causes of environmental hazards. Throughout the transport, storage, and fueling process, fuel products can spill to land and water bodies causing serious health and environmental problems.
There are ways to properly safeguard against accidents that occur during the usage of fueling equipment. They include installing spill kits on the fuel truck and fuel equipment designating skilled fuel administrators.
Fueling tractors and other heavy machinery require a lot of caution since it contains all the three ingredients of fire. They include the presence of flammable material, cause of detonation and oxygen.
To minimize the occurrence of these hazards, the following points need to be noted.
1. Use the Right Type of Fuel
Often, different tractors use either diesel or gasoline. Before fuelling double check the machine to determine the type o fuel it uses. Suppliers usually label the machines clearly and correctly according to the fuel types to avoid the mix-up.
2. Turn Off the Engine
It is important to ensure that the tractor is turned off and is cool before fueling. Having the engine running can cause a spark generated from the abrasion between the fuel filler neck and the fuel itself.
Once the static electricity is discharged, it generates sparks that can light up the fuel vapors. This can also be controlled by using a ground wire to earth the tractor or dropping mounted equipment so that it comes in contact with the ground to lessen the static electricity.
The fuel filler necks of tractors and the dispensing pumps in the fuel station have also been earthed to reduce and have the power over static energy formed during fuelling.
3. Avoid Overfilling
When fueling, be careful and take as much time as you can to ensure no spillage which could ignite a fire. You should not also fill the tank to the brim as the equipment expands with hot temperatures. Therefore, enough space should be left in the tank to accommodate this expansion.
4. Minimize Spillage
Subsequent to fueling, ensure that all the fuel has flown from the hose. If any spillages occur, it should be wiped out immediately and the rags used for moping should be disposed of in an approved can away from high temperatures.
You should also avoid using fuel pumps with high speed. This increases the chances of spilling especially when fueling tractors with synthetic fuel tanks. Rapidly flowing fuel have high chances of developing static electricity.
5. Ensure Proper Positioning
This entails having the fuel station in an open, well-ventilated place. One needs to stay in an upright position so that they can fuel without getting tired. Moving around, entering and leaving the tractor could generate static energy. If there is need to enter the tractor, one should touch the metal outside to be discharged of the static electricity.
When pulling up to the service station, you should drive up to the storage tank slowly to avoid bumping it. Opening the fuel cap should be done bit by bit to compel the built up pressure. The storage area should also be placed in an area free of any wild plants or flammable objects.Read More