Did you know that your Brita pitcher is not just a water filter, but also a home for bacteria? Yes, the small openings of this pitcher are perfect for the growth of bacteria. Cleaning your Brita pitcher regularly will keep it clean and healthy. It’s time to get rid of that nasty smell and germ-infested water. Follow these steps to learn how to clean your Brita pitcher.
How To Clean A Brita Pitcher?
Step 1: Fill the pitcher with tap water
Before you do anything, make sure the pitcher is filled with plain tap water. If you are cleaning a Brita pitcher that is already attached to a faucet, switch off the water valve. If you’re cleaning a pitcher with a filter, turn off the water supply to the pitcher. Make sure the pitcher is empty before you start, as any residual water can affect the cleaning process. Don’t use hot water to fill up the pitcher as this might damage the pitcher. Ideally, you should use cold water for this step to avoid any adverse effects. Remember, the first step to cleaning a Brita pitcher is to fill it with tap water.
Step 2: Add one Brita filter to the Pitcher
Once the pitcher is full of water, add one Brita filter to the pitcher. The filter might come pre-filled with Brita water filter cartridges or empty cartridges. If it’s the former, simply break the seal and drop the filter into the pitcher. If it’s the latter, remove the seal and fill up the filter with clean water. You’ll have to refill the filter every two months or 40 gallons, whichever comes first. Remember, the second step to cleaning a Brita pitcher is to add the Brita filter to the pitcher.
Step 3: Let the pitcher sit for 10 minutes
Let the pitcher sit for 10 minutes so that the Brita filter can soak up the water. This is especially helpful if you’re using an empty filter. During this time, the water will pass through the filter and collect impurities on its way out. At the end of the 10-minute period, give the pitcher a good shake and turn it upside down so that the water stays in the pitcher. Remember, the third step to cleaning a Brita pitcher is to let it sit for 10 minutes.
Step 4: Rinse the pitcher with fresh water
This step is optional but recommended if you’re cleaning a Brita pitcher that is already attached to a faucet. Turn on the water and let the water flow through the filter for about a minute until it looks clean. Make sure you use fresh water for this step so that you don’t end up mixing the old and new water. Remember, the fourth step to cleaning a Brita pitcher is to rinse it with fresh water.
Step 5: Dry and store your Brita Pitcher!
Once the pitcher is clean, turn off the water and place the pitcher upside down on a clean, dry surface. You should also clean the faucet and make sure it’s shut off before you proceed to the next step. Gently wipe the exterior of the pitcher with a soft cloth to remove any residue and then store it until you need it next. Remember, the fifth step to cleaning a Brita pitcher is to dry it and store it.
Why Is Your Brita Pitcher Dirty?
Staining
If your Brita pitcher is stained, you should clean it immediately. The Brita filter can remove most forms of impurities from water, but it can’t eliminate minerals that are already present in the pitcher. Over time, these minerals can build up and turn your pitcher a brown or black color. To clean your pitcher, simply put a warm water and household dish soap into the pitcher. This should help remove the stains and make the pitcher look fresh again. You should also wash out the filter regularly to make sure it’s removed impurities that could stain your pitcher.
Dried Food Residue
Food particles left inside the filter can cause a very bad odor. You can avoid this problem by making sure that you clean your Brita pitcher after every use. If you don’t clean out the filter on a regular basis, food particles can build up and become rotten. This will cause a very bad odor and you’ll need to clean your pitcher sooner than you would otherwise. The more frequently you clean out the filter, the less likely it is that food will end up inside it. If you have children trying to use the pitcher without cleaning the filter, this is something you should keep in mind. Kids are likely to put things inside the pitcher that shouldn’t be there. This can cause your pitcher to get dirty more quickly and can be very dangerous.
Bacteria Growth
Brita pitchers can be breeding grounds for bacteria if they’re not cleaned properly. To avoid this, clean your filter regularly. You should also make sure that the lid on your pitcher is closed after each use. If there is water left inside the pitcher, you should pour it out. If there are any food particles in the pitcher, rinse them out too. It’s best to keep your pitcher empty between uses so there’s no residue or bacteria inside the pitcher. If you don’t clean your pitcher regularly, bacteria can grow in the water that’s inside it. This can lead to health issues and you should make sure you clean your pitcher as soon as possible.
Brita Filters Are Dirty When You Buy Them
The first time you use your pitcher, you might notice a very bad taste. This is caused by the fact that the filters are very dirty when you buy them. The filter should last for 40 gallons, so it should clean the water in between 40 and 50 pitchers. If the filter is dirty when you buy it, you’ll need to clean it before you can use the pitcher. This will get rid of the impurities that are present in the filter. Once you’ve cleaned it, the water should taste much better.
Your Water Is Too Cloudy
Even though Brita filters can remove impurities from water, they can’t remove everything. If your water is too cloudy, the filter may not be able to clean it properly. To prevent this from happening, use cold water when filling your pitcher. This will ensure that your water is nice and clear. You should use cold water even if you have a hot environment. Even if your water has been heated, it will become cloudy when it cools down. You can also try not filling the pitcher completely. This can help keep your water clearer.
The Dangers Of A Dirty Brita Pitcher
If you regularly clean your Brita pitcher, it will last longer. It will also keep impurities out of your drinking water and taste better. If you don’t clean your pitcher regularly, it can get really gross. A dirty pitcher can grow bacteria, which can lead to health problems. Here are a few dangers of a dirty Brita pitcher.
- Bad Taste: A dirty pitcher can affect the taste of the water because impurities from the water get trapped inside the filter. This can make the water taste like plastic or have a strange taste.
- Health Risks: A dirty pitcher can also lead to health risks. Bacteria can grow in a dirty pitcher, which can cause health problems like stomachache, nausea, vomiting, and diarrhea.
Tips For Effective Brita Pitcher Cleaning
Regular cleaning of your pitcher will ensure that it remains hygienic and healthy. You should clean your Brita pitcher every one or two weeks, or after every 10 or 12 uses. Here are a few steps to clean your pitcher effectively.
- Remove the Filter – While cleaning the pitcher, you need to remove the filter because it will get in the way. Make sure to turn off the filter before removing it. The easiest way to remove the filter is to twist it until it comes out.
- Scrub the inside – Use mild dish soap to scrub the inside of the pitcher. Make sure to scrub the grooves of the filter as well. Let the pitcher air dry before putting the filter back.
- Clean the outside – You don’t need to scrub the outside of the pitcher, but you can wipe it clean with a damp cloth to remove any dirt or grime. Make sure the pitcher is completely dry before you put it back in the fridge.
- Replace the filter – After cleaning the filter, make sure to replace it. It is recommended that you replace the filter every six months or so.
Conclusion
A clean pitcher will last longer and taste better. Regular cleaning is the only way to keep your pitcher clean. Follow these steps to clean your Brita pitcher effectively. Remember, a clean pitcher is a happy pitcher.
