How To Mount A Surge Protector Under A Desk

How To Mount A Surge Protector Under A Desk

Surge protectors help protect electrical equipment from sudden surges or spikes in voltage. This is because the metal chassis and other internal components generate heat when they are operational. In this article, we will discuss how you can mount a surge protector for computers under your desk so that it does not get hot and uncomfortable during extended periods of use. The computers and other electronic devices you connect to your surge protector will not be damaged by these fluctuations in power either. The protection protects electrical equipment and devices connected to the surge protector.

How To Mount A Surge Protector Under A Desk?

  1. The first thing you need to do is rearrange your desk. The best way to mount a surge protector under your desk is to remove the surface of the desk and then slip the surge protector beneath it. This will allow you to easily access the power cords and other connections that you will need to connect your computer and other devices.
  2. Once you have removed the surface of your desk, place a large piece of plywood on top of it, making sure that it does not extend beyond the edges of the desk itself. This will help protect both your floor and carpet from any damage that may occur when you mount a surge protector for computers under your desk.
  3. Now place the second piece of plywood on top of the first piece in order to create a solid foundation for mounting your surge protector for computers under your desk.
  4. Next, drill holes into each corner of this foundation so that you can use screws in order to affix it firmly in place.
  5. Now it’s time to mount your surge protector for computers under your desk. The first thing you need to do is connect the power cord to the surge protector and then plug it into a power outlet. Once this is done, you can move on to mounting the surge protector directly beneath your desk.
  6. In order to do this, you need to place a small board between the undersurface of your desk and the plywood foundation that you previously mounted underneath it. This will help create a gap that you can use in order to mount your surge protector for computers under your desk.
  7. Next, place a few small screws in each corner of this small board so that it holds firmly in place between the undersurface of your desk and the plywood foundation beneath it.
  8. Now all you have left to do is slide the surge protector into position beneath the gap that was created by placing this small board between these two surfaces. As you do this, you can slide the surge protector beneath your desk and then secure it in place with a few screws.
  9. Once all of these steps have been completed, you should be able to plug devices into your surge protector for computers under your desk. You can also rest assured that your computer and other devices will remain safe from electrical surges as long as they are plugged into this surge protector.
  10. Now that you know how to mount a surge protector for computers under your desk, you will be able to enjoy the benefits of having an easily accessible power source for all of the devices that are connected to it. This will allow you to operate these devices more efficiently and with less worry about electrical surges damaging them or causing them to malfunction.

What Is A Surge Protector?

1. Different Types Of Surge Protectors:

There are several different types of surge protectors on the market today. The following is a list of the most common types: Power surge protectors – These devices use metal oxide varistors or MOVs to absorb excess electricity which prevents it from damaging electronic components. By absorbing this extra electricity, power surge protectors prevent power surges from damaging appliances and other electronic devices by converting the excess electricity into heat energy instead. Power strip surge protectors – These surge protectors provide additional outlets for plugging in devices that need to be protected against electrical surges. They also offer protection against voltage spikes and surges like their power strip counterparts do.

2. Surge Protectors Working Process

Surge protectors come in a wide variety of shapes, sizes and designs. They all have the same basic components, however, including a metal oxide varistor or MOV, which is a semiconductor that absorbs excess electricity so that it doesn’t damage other parts of the device . Surge protectors also feature an indicator light that shows when the surge protector is working.

3. The Advantages Of Using A Surge Protector

Having a surge protector can help protect your electronics and appliances from damage caused by power surges. A surge protector can also help you save money on your electricity bill since it prevents the need for you to replace damaged devices.

4. The Disadvantages Of Using A Surge Protector

There are no disadvantages of using a surge protector. In fact, there are only advantages!

5. Surge Protectors Cost

Surge protectors are very affordable. You can find them at most electronics stores and online for under $10. It’s a small price to pay for the peace of mind that comes with knowing your electronics and appliances are protected against power surges.

How Do You Mount A Surge Protected Computer?

  • A surge protector can easily be mounted to a wall using the screws that are included with the device.
  • To tell if your surge protector is working, simply check the indicator light. If it’s on, that means the surge protector is working to protect your devices.
  • You know that your surge protector is working properly if it doesn’t break or smoke when a power surge hits it. You should also be able to see an indicator light when you have the device plugged in and turned on.
  • Surge protectors provide protection for computers and other electronic devices. They are usually equipped with a special type of outlet called a protected outlet.This allows you to continue using your computer without worrying about electrical damage. However, unplug any devices that aren’t in use and turn off any attached printers or monitors so they don’t draw extra electricity from the outlet.
  • When you are choosing a surge protector, you should make sure it has a high joule rating. This means that it can handle a high amount of electricity. You should also check to see if the surge protector has any extra features, such as an on and off switch or indicator lights.
  • In order to find out what the best surge protectors are, you have to consider several factors, including price and joule rating. It’s also important to make sure that the device you choose has additional features like an on/off switch or indicator lights so that you know when it’s working properly . You can also find out which ones were considered the best by reading reviews online.

Add A Surge Protector To Your Home Network

  • Surge protectors are designed for indoor use only. Do not install a surge protector outdoors or in any area that could be exposed to water or moisture. If moisture enters the unit, it may cause an electric shock or fire hazard.
  • Never push objects into an outlet or extension cord because they could touch dangerous voltage points or short-out the wires inside. Contact with these voltage points can cause severe burns and injuries, and possibly death.
  • Do not overload wall outlets and extension cords by plugging in too many appliances at one time. Overloaded wall outlets and extension cords can cause sparks that could start a fire, damage your electronics, and even start a fire in your home!
  • Never install a ceiling fan on an extension cord if it hangs from the ceiling; it should be attached directly to the electrical source by wiring . If you want to use an extension cord with a ceiling fan, make sure it has its own built-in GFCI protection so you don’t overload the circuit .


The best way to keep your computer safe from surges is to use a surge protector. It’s also a good idea to add surge protection to your circuit and to have a surge protector on your wireless home network. A surge protector mounted under your desk or connected to your circuit, will protect your computer from surges and will save you from an uncomfortable warm desk environment.

Previous Story

Can You Use Dish Soap As Hand Soap

Next Story

Why Is My Well Water Brown

Latest from Blog